CNC machining center is a high-precision mechanical equipment. In order to ensure its normal use and extend its life, correct maintenance and upkeep is essential. The following are the maintenance and upkeep methods of CNC machining centers for your reference.
1. Regularly inspect and clean all parts of the CNC machining center. Never spray water or detergent directly on electrical equipment. Use a soft cloth with suitable temperature and humidity to wipe it.
2. Check whether various mechanical devices are normal, such as whether the ball screw, slide rail, light beam is excessively worn, etc. If there is any abnormality, deal with it immediately.
3. Maintain static electricity insulation. The operating instructions should be followed to avoid static electricity that affects the life of the device.
4. Maintain tools and cutting tools. After use, they should be cleaned, checked for damage, broken blades, missing parts, etc., then labeled and stored in categories for next use.
5. Pay attention to the heat emission settings of the CNC machining center to ensure the normal operating temperature of the machine. Clean the radiator in time. Dust and debris inside the machine should be cleaned at least once a year to ensure that the heat pipe is unobstructed.
6. Regularly check the air path system of the CNC machining center. Improper pipe laying and insufficient tightness during installation should be avoided to avoid deflation of the gas system.
7. Check the operation of electrical components, communication lines, PLC and CNC motherboards, such as chips, capacitors, relays, etc. If there are any damaged cycloid reducers, replace them in time.
8. Frequently lubricate various motors, transmission parts, hydraulic components, etc. to ensure the stability and durability of the machine and enable the machine to operate better.
The above 8 points are some key points in the maintenance and upkeep of CNC machining centers. You can refer to the actual situation to formulate a more detailed maintenance plan.