CNC vertical lathe is a high-precision and high-efficiency processing equipment. It can greatly improve the production efficiency of manufacturing enterprises and is widely used in various fields. However, in daily use, if it is not maintained and maintained, the service life of the CNC vertical lathe will be greatly shortened. Next, let’s learn how to extend the service life of CNC vertical lathes.

1. Clean and lubricate regularly

During the use of the CNC vertical lathe, a large amount of iron filings and oil will be produced during the processing of the workpiece. These iron filings and oil will be deposited on the moving parts of the equipment, causing the friction to increase, thus making the operation of the equipment unstable and affecting the performance of the equipment. Normal use of CNC vertical lathe. Therefore, regular cleaning and lubrication of equipment is necessary. You can use compressed air or a blow gun to blow off iron filings and oil stains on the equipment, and lubricate important parts of the equipment so that it can operate normally.

2. Pay attention to the equipment operating environment

The service life of CNC vertical lathe is also inseparable from its operating environment. During use, the environment in which the equipment is located should be dry, dust-free, and free of acidic and corrosive gases. Because these factors will cause equipment to rust and corrode, and accelerate equipment damage. In addition, the CNC vertical lathe should be placed in a well-ventilated and clean place to prevent dust and particles from entering the equipment.

3. Check and replace equipment parts

Due to long-term use and friction, the mechanical properties of the components in CNC vertical lathes may decrease over time. Therefore, for CNC vertical lathes that have been used for a long time, we need to regularly check and replace the parts in the equipment to avoid damage to parts that will affect the normal use of the equipment.

4. Carry out CNC vertical lathe maintenance

In the normal use of CNC vertical lathes, the equipment needs to be maintained to extend its service life. During the maintenance process, it is necessary to inspect and maintain all parts of the equipment, and deal with the parts where problems are found in a timely manner to avoid greater damage. At the same time, the equipment must be adjusted and calibrated to ensure the working accuracy and stability of the CNC vertical lathe.

5. Strictly abide by the usage specifications of CNC vertical lathes

During the operation of the CNC vertical lathe, it is necessary to strictly abide by the manufacturer's usage specifications, especially safety operation matters. During use, it is necessary to prevent irregular operations such as overloading and overspeeding of the equipment to avoid adverse effects on the equipment.

In short, the service life of a CNC vertical lathe is a process that requires us to pay attention to details and perform regular maintenance and upkeep. Only by reducing the loss of equipment during use in compliance with regulations can CNC vertical lathes serve production and life more stably and efficiently.