The vertical lathe tool holder is a common machine tool accessory used to support and clamp workpieces, help position the workpieces and improve processing quality. When we perform turning processing, we must ensure that the geometric dimensions of the workpiece meet the requirements, which requires the use of a vertical lathe tool holder for positioning and correction. So, how to quickly correct the workpiece with the vertical lathe tool holder?
First of all, before using the vertical lathe tool holder for processing, we must carefully check whether the workpiece and the vertical lathe tool holder are damaged or loose. Next, we can correct the artifact using the following steps:
1. Determine the processing surface
First, we need to determine the processing surface of the workpiece, which is usually the largest plane on the workpiece. Hang the vertical lathe tool holder on the workpiece plane and slowly adjust it to a horizontal position, making sure it is perpendicular to the centerline.
2. Calibrate the tool holder
Next, we need to calibrate the vertical lathe tool holder to ensure it is perpendicular to the machined surface of the workpiece. First, install the test bar on the tool holder, then insert the test bar into the tool hole, and gradually adjust the tool holder until the test bar is parallel to the machined surface.
3. Position the workpiece
Now we need to secure the workpiece to the vertical lathe tool holder. You can use chucks or clamps to hold the workpiece to ensure it is firmly fixed to the tool holder.
4. Adjust cutting tools
Finally, we need to adjust the cutting tool. You can use a Chaney gear inducer or a CNC system to gradually adjust the tool position to ensure it is parallel to the workpiece surface.
Through the above steps, we can quickly and accurately correct the workpiece to make it meet the processing requirements. The vertical lathe tool holder can not only help us position and clamp the workpiece, but more importantly, it can ensure the geometric size and processing quality of the workpiece. Therefore, when using the vertical lathe tool holder for processing, we should carefully check and correct it to ensure the accuracy and quality of the workpiece.