Maintenance methods of machining center:

1. Regular cleaning: Regularly clean the outside and inside of the machining center, including removing cutting oil residue, chips and coolant residues from the surface of the machine tool.

2. Maintenance of the lubrication system: Ensure the normal operation of the lubrication system, regularly check and replace the lubricating oil, keep all parts of the machine tool well lubricated, and reduce wear.

3. Regularly check the transmission system: Regularly check the belts, gears, bearings and other components of the transmission system to ensure the normal operation of the transmission system and avoid machine tool shutdowns caused by transmission system failures.

4. Check the cooling system: Regularly check the coolant quality and flow rate of the cooling system to ensure that the cooling system is working properly and prevent the tool and workpiece from overheating.

5. Regular calibration: Regularly calibrate the geometric accuracy and transmission accuracy of the machining center to ensure processing accuracy and quality.

6. Regularly check the electrical system: Regularly check the wiring, contactors, relays and other components of the electrical system to ensure the normal operation of the electrical system and prevent machine tool shutdowns caused by electrical faults.

7. Keep the environment clean: Keep the working environment around the machining center clean and tidy to prevent dust and debris from entering the machine tool and affecting the processing quality and machine tool performance.

8. Timely maintenance and replacement of worn parts: Timely inspection and replacement of seriously worn parts, such as cutting tools, bearings, etc., to ensure processing quality and production efficiency.