CNC lathe is a kind of equipment that can realize automatic processing, but during use, various faults and alarm prompts often occur. These alarm prompts may affect the normal use of the equipment, so the relevant lifting methods are very important.

1. Power off and restart method

If the CNC lathe displays an alarm prompt and stops working, we can try to use the power-off and restart method to solve the problem. The specific steps are as follows:

(1) First press the stop button to stop the CNC lathe;

(2) Then cut off the power of the CNC lathe and wait for a few seconds;

(3) Turn on the power of the CNC lathe again, turn on the power switch of the equipment again, and start debugging the equipment;

(4) If the system starts normally, processing can be restarted.

2. Adjust parameter method

Sometimes, alarm prompts appear on CNC lathes because the parameters set by the equipment are inappropriate and need to be adjusted accordingly. At this time, we need to check the parameter settings of the device and determine which parameters need to be modified. The specific steps are as follows:

(1) Check the parameter settings of the device and find which parameters are inappropriate;

(2) Adjust the corresponding parameters to meet the equipment processing needs;

(3) Restart the CNC lathe for processing testing and check whether an alarm prompt appears.

3. Confirm the workpiece clamping method

Sometimes the alarm prompt on the CNC lathe is because the workpiece is not clamped properly, and we need to re-confirm the clamping condition of the workpiece. The specific steps are as follows:

(1) Check whether the workpiece clamping device is in good condition and whether it can clamp the workpiece;

(2) When the workpiece clamping device cannot clamp the workpiece, the clamping device needs to be repaired;

(3) When the workpiece clamping device is normal, after re-clamping the workpiece, restart the CNC lathe for processing testing.

In short, there are various ways to clear the alarm system of CNC lathes. In the face of different alarm prompts, we need to take corresponding ways to clear it. It should be noted that when using CNC lathes for processing, we must strictly follow the equipment instructions to avoid malfunctions and alarm prompts caused by improper operation.