The stuck tool magazine of the machining center is one of the common problems of the machining center. If not dealt with in time, it will lead to production delays. This article will introduce the reasons and treatment methods for the tool magazine of the machining center to be stuck, so as to help operators who have similar problems during the production process solve the problem in time and ensure the production progress.

There are many reasons for the tool magazine of the machining center to get stuck, including the tool magazine is not firmly installed, the tools in the tool magazine are not installed in a standardized manner, and the machining center is worn due to excessive use. When encountering this situation, we need to deal with it effectively.

First, check the installation status of the tool magazine to see if the tool magazine is loose or has other foreign objects interfering with the operation of the tool magazine. If there is a problem with the tool magazine installation, it is necessary to tighten the screws or replace loose parts. Also pay attention to whether the tool installation inside the tool magazine is standardized, that is, during operation, the position of the tools on each tool position must be correct, the length and diameter of the cutting head must be appropriate, and attention must be paid to cleaning the tools to ensure the good operation of the tool bearings.

If none of the above methods solve the problem, it is likely that the machining center tool magazine is stuck due to overuse or wear. This situation requires disassembly and cleaning of the tool magazine and replacement of worn parts. Before replacement, be sure to ensure the quality of new parts, perform maintenance on the entire equipment, and regularly check tool magazines, tool bearings, servo motors and other components.

In short, there are many reasons why the machining center tool magazine is stuck, but you only need to follow the above-mentioned processing methods and adjust the tool magazine equipment while ensuring your own safety, you can quickly solve the problem and ensure the smooth progress of production progress. Not only that, straightening out the work process and doing daily maintenance of the equipment are also important factors to avoid the problem of tool magazine jamming in the machining center.