CNC vertical lathe is a kind of precision processing equipment, and its maintenance is the key to ensuring its normal operation and extending its service life. During maintenance, you need to pay attention to the following points:

1. Check the equipment regularly. After a CNC vertical lathe has been used for a period of time, some problems may occur, such as aging of electrical circuits, damaged bearings, etc. Therefore, it is necessary to regularly check various indicators of the equipment, including electrical systems, mechanical systems, hydraulic and pneumatic systems, etc.

2. Clean the equipment. In daily use, CNC vertical lathes may accumulate some dust, grease, iron filings and other debris. These debris will affect the normal operation of the equipment and shorten the life of the equipment. Therefore, it is necessary to regularly clean equipment, including casings, machine tools, tool holders, workbenches, etc.

3. Change lubricating oil regularly. Coolant and lubricating oil are necessary for the normal operation of the CNC vertical lathe, so the lubricating oil and coolant need to be replaced regularly. At the same time, it is necessary to ensure that the oil quantity and liquid level comply with regulations, so as to ensure the normal operation of the equipment.

4. Adjust various parameters. During the operation of CNC vertical lathe, various parameters need to be adjusted according to different requirements. For example, the feed speed, processing depth, and cutting speed of the tool must be adjusted according to different raw materials. Therefore, it is necessary to understand the role of each parameter and adjust it according to requirements.

5. Maintain normal usage environment. The normal use environment of the CNC vertical lathe is the key. During use, it is necessary to maintain a clean and tidy working environment and ensure that the work area is free of debris, oil, etc.

Maintaining a CNC vertical lathe is not an easy task, but only by doing a good job of maintenance can we ensure its normal operation and extend its service life. Therefore, maintenance work needs to be done strictly in accordance with the above points. At the same time, in order to better use the CNC vertical lathe, you should also understand the working principle, characteristics and operating procedures of the equipment, which also requires continuous learning and improvement in daily life.