CNC vertical lathe is a high-precision and high-efficiency machine tool. Many aspects need to be paid attention to during processing to ensure processing quality and efficiency. The following are some things you should pay attention to when processing CNC vertical lathes:

Preparation before processing: 1. Carefully review the drawings to understand the shape, size, accuracy and other requirements of the parts, and determine the processing technology and processing route. 2. Check whether the power supply and air source of the CNC vertical lathe are normal to ensure the stable operation of the machine tool. 3. Install the workpiece and adjust the tool to ensure that the tool is sharp and accurate.

Processing parameter settings: 1. Select appropriate cutting parameters, such as cutting speed, feed speed, cutting depth, etc., according to material type, processing requirements, etc. 2. Adjust the tool path to ensure that the tool path is reasonable and accurate to avoid overcutting or undercutting. 3. Set the machining allowance and adjust the allowance according to workpiece size, tool type and other factors to ensure machining accuracy and surface quality.

Operation precautions: 1. During the machining process, always observe the cutting status, and adjust parameters or replace tools in a timely manner if abnormalities are found. 2. Make sure the tool is clamped tightly to prevent it from loosening or falling off. At the same time, collision or interference between the tool and the workpiece must be avoided. 3. During the machining process, pay attention to prevent coolant from splashing into the machine tool or the operator. 4. After completing the processing, clean the workbench and the inside of the machine tool promptly and keep them clean.

Maintenance: 1. Regularly check whether the functions of the CNC vertical lathe are normal. If any abnormalities are found, repair them in time. 2. Regularly replace cutting tools and fixtures to ensure processing accuracy and efficiency. 3. Clean the internal and external surfaces of the machine regularly and keep them tidy. 4. Lubricate and maintain the machine tool regularly to extend its service life.

In short, CNC vertical lathe processing is a highly technical job that requires operators to have rich experience and skills. In actual operation, the operation should be strictly followed and the above precautions should be paid attention to to ensure the processing quality and efficiency.