The regular inspection of small CNC vertical lathes mainly includes the following aspects:

1. Hardware equipment inspection: Check whether the main components of the small CNC vertical lathe, such as the slide table, gearbox, spindle, etc., are intact. At the same time, check whether auxiliary equipment, such as hydraulic systems, protective covers, electric control boxes, etc., are operating normally.

2. CNC system inspection: The small CNC vertical lathe performs program inspection to ensure that the servo motor control system, position sensor, counter and other components are working properly. In addition, perform a machine tool motion test to check whether the movement of each axis of the machine tool is normal.

3. Processing quality inspection: The small CNC vertical lathe checks the dimensional accuracy, surface finish, contour, etc. of the workpiece through simulated processing to ensure that the processing quality meets the requirements.

4. Electrical system inspection: Use the small CNC vertical lathe to check the main power lines and cable connections to ensure that the wiring is correct and there is no short circuit or leakage. At the same time, the small CNC vertical lathe checks the wiring of the motor and driver, and whether the motor reverse and overload protection functions are normal.

5. Lubrication system inspection: Use a small CNC vertical lathe to check whether the lubrication pump and its pipelines are smooth and ensure sufficient lubricating oil. At the same time, check whether the filter in the lubrication system of the small CNC vertical lathe is clean to facilitate the flow of oil.

6. Tool and fixture inspection: Inspect the small CNC vertical lathe to check the wear of the tools, and replace severely worn tools in a timely manner. At the same time, check the tightening of the fixture to ensure the safe clamping of the workpiece.

In addition to the above-mentioned regular inspections, a detailed maintenance plan should be formulated according to the requirements in the user manual and executed on time, such as replacing lubricating oil and grease, cleaning and replacing filters, inspecting and replacing seals, etc.

Please note that these regular inspections are to ensure the normal operation and processing quality of the small CNC vertical lathe. Relevant safety regulations should be followed during operation to avoid accidents. If necessary, it is recommended to consult professional technicians or machine tool manufacturers for more detailed guidance.