Mastering the operation method of CNC vertical lathe requires an in-depth understanding of the working principle and operating procedures of the equipment. The following are general CNC vertical lathe operation methods:

1. Start-up preparation: Wear personal protective equipment, check whether the surrounding environment and equipment of the CNC vertical lathe are safe, and ensure that the power supply and main power switch are turned off.

2. Turn on the power: Turn on the power switch of the CNC vertical lathe, usually located on the CNC system control cabinet or operation panel. Then check whether the CNC system, hydraulic system, etc. start normally.

3. Start the CNC system: Press the power button or start button of the CNC vertical lathe CNC system and wait for the system to start. You may need to enter your username and password to log in.

4. Load the processing program: CNC vertical lathe imports the pre-written processing program from external storage media (such as U disk, network) into the CNC system.

5. Set processing parameters: Set processing parameters in the CNC vertical lathe CNC system, including cutting speed, feed speed, tool path, etc. These parameters are adjusted according to specific processing requirements and materials.

6. Clamping the workpiece: The CNC vertical lathe uses appropriate clamps to clamp the workpiece on the CNC vertical lathe to ensure firm clamping and accurate positioning.

7. Manual debugging: Before starting automatic processing of CNC vertical lathe, you can choose manual mode for debugging. Verify tool paths and workholding by manually operating each axis to ensure no issues arise during machining.

8. Automatic processing: After the CNC vertical lathe confirms that everything is ready, start the automatic processing function of the CNC system and let the CNC vertical lathe perform processing operations according to the set processing program.

9. Monitor the processing process: During the processing of the CNC vertical lathe, monitor the operating status of the CNC vertical lathe at any time, and pay attention to observe whether there are any abnormal situations, such as alarm information, cutting quality, etc.

10. End processing: After the CNC vertical lathe processing is completed, stop the operation of the CNC vertical lathe, remove the workpiece, and perform necessary cleaning and maintenance work.

11. Shut down: Turn off the CNC vertical lathe CNC system, main power switch and other equipment to ensure that the equipment is in a safe state.

When mastering the operation methods of CNC vertical lathes, ensure strict compliance with the equipment operation manual and safety regulations, and receive professional training and guidance.