CNC vertical lathe is a machine tool widely used in the field of mechanical processing. How to brake when using a CNC vertical lathe? Let’s briefly introduce it below.
First of all, the brakes of CNC vertical lathes are controlled by motors. The brake motor sends control signals from the CNC, and the brake signals are transmitted to the motor through the circuit. However, when using CNC vertical lathe brakes, you need to pay attention to the following points:
1. Before braking, the workpiece needs to be fixed to avoid movement that may affect the processing quality.
2. When braking, slowly reduce the processing speed and stop gradually. Do not brake suddenly to prevent the machine from being overloaded or damaged.
3. After braking the CNC vertical lathe, you need to check whether the workpiece is stable and fixed. If you need to re-clamp the workpiece or adjust the tool, you should check the processing quality again.
In short, the braking of CNC vertical lathe is a very important operation and must be done with great caution and attention. If it is not operated correctly, machine failure or poor processing quality may occur.