The double-column vertical lathe is a common processing equipment in the machine tool industry. Its main function is to process metal products. For the use of double-column vertical lathes, how to determine the cutting amount and how to extend the service life are very important issues. This article will provide a detailed analysis of the double-column vertical lathe from these two aspects to help users make better use of this equipment.

1. Determination of the cutting capacity of a double-column vertical lathe

The cutting amount refers to the thickness of metal that is cut off the workpiece during each turning process. For a double-column vertical lathe, it is necessary to determine the reasonable cutting amount based on the type, hardness, size and other factors of the processed materials. By determining a reasonable amount of tool engagement, the efficiency of turning tool usage can be improved, and chips and tool wear can also be reduced, thereby extending service life.

When processing, it is necessary to ensure that the total force is within a reasonable range, otherwise it will cause problems such as vibration of the turning tool, excessive noise, or even tool breakage. When turning, you should first adjust the turning tool to a suitable height, move the lathe tool holder to the center of the workpiece, and then measure the cutting amount. After determining the appropriate cutting amount, you can adjust the turning deviation and process the workpiece. During this process, you need to pay attention to maintaining the level and balance of the lathe to ensure the quality of turning.

2. How to extend the service life of a double-column vertical lathe

In order to extend the service life of a two-column vertical lathe, the equipment must be kept clean and maintained. During use, accessories such as turning tools and cutting oil need to be replaced in time according to regulations to ensure the normal operation of the machine tool. In addition, it is also necessary to perform regular maintenance based on the usage of the equipment. Clean the lubrication system of the equipment, especially the transmission and gears, to maintain its flexible operation. At the same time, check the equipment seals, and replace defective parts and damaged accessories to prevent negligence. the hidden dangers arising from it.

When using a double-column vertical lathe, you also need to pay attention to prevent overload operation and excessive work, to avoid wasting turning tools and burning out the motor due to excessive pressure caused by rapid deformation of the machine tool. When performing machining operations, it is necessary to strictly follow the specifications such as the cutting amount, feed speed, and tool edge angle specified by the equipment to avoid shortening the equipment life due to incorrect operations.

Summarize:

As a frequently used equipment in the machine tool industry, the double-column vertical lathe is very important for users to use it correctly. Correctly determining the amount of cutting, paying attention to equipment maintenance, and preventing overload operation and excessive work are the keys to extending its service life. Only by doing these basic tasks well can the machine tool maximize its effectiveness and greatly improve production efficiency in production.