The maintenance of small CNC vertical lathes is a systematic process, involving multiple aspects of inspection and maintenance. Here are some key maintenance steps and suggestions:

1. Placement and working environment:

Place the small CNC vertical lathe on a flat ground to avoid direct sunlight and other radiation, and away from vibrating equipment.

Control the temperature in the space of the small CNC vertical lathe between 15-35°C, especially the processing temperature of precision components should be controlled at around 20°C to avoid large temperature fluctuations.

Avoid small CNC vertical lathe power supply fluctuations to prevent interference signals from affecting the machine tool.

2. Daily inspection and warm-up:

Before starting the small CNC vertical lathe every day, warm up the small CNC vertical lathe for about 10 minutes and check whether the oil circuit of the machine tool is smooth.

Remove small CNC vertical lathe chips, oil, dust and other debris to ensure the cleanliness of the machine tool.

Check the condition of the coolant in the cooling box of the small CNC vertical lathe, and whether the full signal light, air pressure and air blowing in the spindle inner cone are normal.

3. Lubrication system maintenance:

Ensure the normal operation of the small CNC vertical lathe lubrication system, add lubricating oil or grease in time to keep all parts lubricated.

Regularly check the oil line, oil window and oil mark of the small CNC vertical lathe to ensure that the oil line is smooth, the oil window is clear and the oil mark is eye-catching.

4. Electrical system inspection:

Regularly check the electrical system of the small CNC vertical lathe, including the main control box, power cord, motor and sensor, etc.

Check whether the electrical connections of the small CNC vertical lathe are tight, whether there are damaged or aging circuits, and replace damaged components in a timely manner.

5. Machine tool accuracy calibration:

CNC vertical lathes are high-precision machine tools, so their processing accuracy needs to be checked regularly to see if they meet the requirements.

According to the requirements of the small CNC vertical lathe user manual, precise adjustments are made to ensure its working accuracy and stability.

6. Tool and fixture maintenance:

Regularly check the wear of small CNC vertical turning tools and replace seriously worn tools in a timely manner.

Check the fastening condition of the small CNC vertical lathe fixture to ensure the safe clamping of the workpiece.

7. Regular maintenance plan:

According to the requirements in the small CNC vertical lathe user manual, make a detailed maintenance plan and execute it on time.

This includes replacing small CNC vertical lathe lubricants and grease, cleaning and replacing filters, checking and replacing seals, etc.

8.Safety protection:

During operation, small CNC vertical lathes should wear protective glasses and gloves to avoid splash or cutting injuries caused by the operation of the machine tool.

Keep the area around the small CNC vertical lathe clean and tidy to prevent foreign matter from entering the inside of the machine tool.

Please note that the above maintenance steps are general guidance and specific maintenance requirements may vary depending on the machine model, manufacturer and usage environment. Therefore, when performing maintenance, it is best to refer to the machine tool manual or consult professional technicians to ensure the accuracy and effectiveness of maintenance.