The operating steps during CNC machine tool cutting usually include the following main stages:

1. Preparation:

Check the working status of CNC machine tools to ensure that the machine tools are operating normally.

Install CNC machine tool fixtures and clamp the workpiece, adjust the position of the workpiece, and ensure that the CNC machine tool workpiece is fixed and stable.

Install CNC machine tools and measure and calibrate tool lengths.

2. Programming operations:

Write CNC programs for CNC machine tools, including setting parameters such as machining trajectory, cutting speed, feed speed, and cutting depth.

The CNC machine tool enters the CNC program into the CNC system, and performs program verification and debugging.

3. Machine tool settings:

Set the CNC machine tool working coordinate system, including workpiece coordinate system and tool coordinate system.

CNC machine tools set processing parameters according to processing needs, such as cutting speed, feed speed, tool compensation, etc.

4. Manual operation:

The CNC machine tool is manually debugged, and the position of the CNC machine tool workpiece and tool is confirmed by manual operation of the axial movement of the machine tool, as well as the accuracy of the tool path.

5. Processing operations:

The CNC machine tool starts the CNC system and starts automatic processing.

Monitor the processing process to ensure stable processing of CNC machine tools.

CNC machine tools regularly check the processing quality and adjust processing parameters or programs to ensure processing accuracy and surface quality.

6. Finish the work:

After the CNC machine tool processing is completed, stop the machine tool operation.

CNC machine tools clean the processing site to remove cutting waste and coolant.

Carry out CNC machine tool maintenance, such as tool replacement, lubrication and refueling, etc.

7.Quality inspection:

CNC machine tools perform quality inspections on processed workpieces to check whether the processed size, shape and surface quality meet the requirements.

Compensate or reprocess if necessary.

8.Record and feedback:

CNC machine tools record processing parameters, processing time, processing quality and other relevant information.

If necessary, feedback problems and improvement suggestions discovered during processing to relevant departments or personnel.

These operating steps of CNC machine tools may vary depending on different processing needs, machine tool types and processing techniques, but they are usually the basic steps in the machining and cutting process.