Routine maintenance of CNC vertical lathes is very important to ensure long-term stable operation of the equipment, improve processing efficiency and extend the life of the equipment. The following are some precautions for daily maintenance of CNC vertical lathes:

1. Regular lubrication:

CNC vertical lathes regularly check and lubricate various lubrication points of machine tools, including guide rails, screw rods, bearings, etc., to ensure that the amount and quality of lubricating oil added to CNC vertical lathes meet the requirements. Different parts of the CNC vertical lathe may require the use of different types of lubricants.

2. Check the coolant:

Regularly check the coolant of the CNC vertical lathe to ensure that the liquid level of the CNC vertical lathe is sufficient and the liquid quality is clean. Replace the coolant when necessary to avoid rising cutting temperatures and affecting processing quality and tool life.

3. Clean up iron filings and cutting fluid residues:

Regularly clean the iron filings, cutting fluid residues and dirt on the surface of each component in the CNC vertical lathe to prevent dust accumulation from affecting the operation of the machine tool and causing mechanical failure.

5. Check the electrical system:

Regularly check the wiring and connection parts of the CNC vertical lathe electrical system to ensure that the CNC vertical lathe cables are intact. Check the running status of the CNC system to ensure the normal operation of various sensors and controllers.

6. Calibrate the CNC system:

Regularly calibrate the CNC vertical lathe CNC system and check the accuracy of the CNC vertical lathe coordinates and tool compensation values to ensure the processing accuracy of the CNC vertical lathe.

7. Check the cutter and cutter head:

Regularly check the wear of CNC vertical turning tools and tool heads, and replace seriously worn tools in a timely manner to maintain processing quality. At the same time, ensure that the CNC vertical lathe tool clamping system is firm and reliable.

8. Calibrate the workpiece holding device:

Regularly check and calibrate the workpiece clamping device to ensure that the CNC vertical lathe workpiece is clamped firmly and stably to prevent deviations during the machining process.

9. Keep the machine tool environment clean:

Keep the working environment of the CNC vertical lathe clean and tidy to prevent dust and debris from entering the inside of the machine tool. A clean environment helps maintain the accuracy and reliability of machine tools.

10. Check the hydraulic system regularly:

Conduct regular inspections of the hydraulic system, including the cleanliness of the oil and the working status of the hydraulic components, to ensure the normal operation of the hydraulic system.

11. Maintain regular maintenance records:

Record the maintenance status of equipment, including lubrication, replacement of parts, calibration, etc., so that problems can be discovered in a timely manner, equipment status can be tracked, and reasonable maintenance plans can be formulated.

The above precautions are the basic points for daily maintenance of CNC vertical lathes. The specific maintenance steps and cycles can be adjusted according to the model and usage of the machine tool. Timely and regular maintenance will help improve the stability and work efficiency of CNC vertical lathes.