The operation method of CNC vertical lathe mainly includes the following steps:

1. Start the system: Press the system start button of the CNC vertical lathe and wait for the system self-test.

2. Reset the machine tool: Make sure the CNC vertical lathe is in the initial state and press the reset button.

3. Processing preparation:

Installing the workpiece: CNC vertical lathes use clamps to fix the workpiece on the workbench to ensure that the workpiece is firmly clamped.

Install the tool: CNC vertical lathe installs the required cutting tool onto the spindle, and adjusts the spindle height and eccentricity adjustment according to the size of the tool.

4. Program input:

Open the CNC programming software: Open the corresponding CNC vertical lathe CNC programming software on the computer.

New program: CNC vertical lathe creates a new machining program.

Input instructions: According to the CNC vertical lathe workpiece processing requirements, enter the corresponding tool path, cutting depth, feed speed and other instructions.

5. Parameter setting:

Cutting speed setting: CNC vertical lathe sets the appropriate cutting speed according to the workpiece material and cutting tool.

Feed speed setting: CNC vertical lathe sets the appropriate feed speed according to the workpiece material and processing requirements.

Spindle speed setting: CNC vertical lathe sets the appropriate spindle speed according to the workpiece material and cutting tool.

6. Machine tool operation:

Select program: The CNC vertical lathe selects the pre-written machining program into the CNC system.

Start processing: Press the start button of the CNC vertical lathe, and the machine tool will start automatic processing according to the program.

As for the emergency measures for mechanical damage to CNC vertical lathes, they mainly include the following points:

1. Emergency treatment of mechanical injuries: When mechanical injuries occur on CNC vertical lathes, temporary measures should be taken immediately, such as making the injured fall to the ground smoothly and avoid large movements, and then be sent to the hospital for treatment in a timely manner.

2. Emergency treatment for electric shock accidents: Once an electric shock accident occurs on a CNC vertical lathe, the power supply should be cut off immediately to remove the person who received the electric shock from the power supply, and manual first aid should be implemented, and then sent to the hospital in time. If the person getting an electric shock is disconnected from the power source and may fall, corresponding precautions must be taken.

3. Emergency treatment of equipment failure: When a CNC vertical lathe failure is discovered, the operation should be stopped immediately, the power should be turned off, and the operation can be resumed only after the problem is eliminated.

Please note that these operating methods and emergency measures for CNC vertical lathes are only general guidance. Specific operations must be carried out according to the specific model of the machine tool, operating manual and safety regulations. When operating a CNC vertical lathe, be sure to pay attention to safety and comply with relevant regulations to ensure the safety of personnel and equipment.